JABATAN KEJURUTERAAN MEKANIKAL
- Details
- Hits: 3633
JABATAN KEJURUTERAAN MEKANIKAL
Pengenalan Jabatan
Jabatan Kejuruteraan Mekanikal (JKM) merupakan antara jabatan kejuruteraan yang menjadi tulang belakang dalam menyokong dan merealisasikan misi dan visi Politeknik. Proses pengajaran dan pembelajaran dijalankan dalam bentuk teori dan praktikal bagi mendedahkan pelajar pada alam pekerjaan yang sebenar. Dengan pengetahuan asas yang kuat dalam bidang kejuruteraan mekanikal serta pengalaman dalam menjalani amali, para pelajar diharapkan dapat berkhidmat dan memberi sumbangan berguna dalam bidang yang diceburinya apabila tamat pengajian kelak. Di samping itu, pelajar berpeluang untuk menjalani Latihan Industri di mana-mana firma awam atau swasta bagi melengkapkan sesi pengajian mereka di politeknik.
Bagi memenuhi keperluan pengajaran dan pembelajaran, JKM dilengkapi dengan 24 kemudahan bilik pengajian sebagai medan penyebaran ilmu. Di samping itu, JKM juga mempunyai 10 kemudahan bengkel, 17 kemudahan makmal, 1 bilik projek dan 1 dewan kuliah yang berfungsi sebagai ruang bagi pelajar mempelajari dan mengasah kemahiran dan juga bagi mengaplikasikan teori yang telah dipelajari di dalam bilik pengajian.
Pensyarah yang ditempatkan di JKM juga berkelayakan dan mempunyai kelayakan profesional.
Program-program yang ditawarkan di Jabatan Kejuruteraan Mekanikal adalah:
- Diploma Kejuruteraan Mekanikal (DKM) / Diploma in Mechanical Engineering (DKM)
- Diploma Kejuruteraan Mekanikal (Pembuatan) (DTP) / Diploma in Mechanical Engineering (Manufacturing) (DTP)
- Diploma Kejuruteran Mekatronik (DEM) / Diploma in Mechatronic Engineering (DEM)
Kurikulum
- Jabatan Kejuruteraan Mekanikal menggunakan kurikulum yang sama seperti semua Politeknik Kementerian Pendidikan Malaysia (Pendidikan Tinggi).
- Kursus terdiri daripada kursus umum, kursus teras dan kursus elektif mengikut bidang Mekanikal, Mekanikal (Pembuatan) dan Mekatronik.
Tempoh Pengajian
3 Tahun (6 Semester)
DKM
ACCREDITATION CODE |
MQA/FA 13178 |
||||||||||||||||||||||||
INTRODUCTION |
In line with the 3rd Industrial Malaysia Plan (IMP3) aiming for the innovative and creative human capital development, via matching talent to expertise with market demand, Diploma in Mechanical Engineering for polytechnic is developed to give balance emphasis on theoretical and practical aspects. The Eleventh Malaysia Plan was drawn to produced 60% out of 1.5 million workers was in TVET sector. Until now a total of 69,475 (51%) of the 136,062 technical education and vocational training (TVET) graduates in Malaysia are working as professionals and skilled workers. Thus, to keep abreast with rapid demand in TVET sector, Department of Polytechnic and Community College Education (DPCCE) progressively collaborates with major industry players in the country in developing the curriculum. The programme will take six semesters to complete, five academic semesters at their respective polytechnics and one semester of industrial training at relevant industries during the final semester. This programme complies with the Board of Engineer (BEM) requirement. |
||||||||||||||||||||||||
SYNOPSIS |
The Diploma in Mechanical Engineering programme is designed to produced holistic graduates that have knowledge and competent skills in the field of mechanical engineering to fulfil the demand of workers in engineering sector. The programme structure focusses on the area of Solid Mechanics, Statics & Dynamics, Thermodynamics & Heat Transfer, Fluid Mechanics, Materials, Mechanical Design, Workshop Practices, Manufacturing, Instrumentation & Control, Mechanical Maintenance, Electrical & Electronic Technology. |
||||||||||||||||||||||||
PROGRAMME AIMS |
The programme believes that every individual has potential and the programme aims to develop adaptable and responsible Senior Assistant Engineers to support government aspiration to increase workforce in engineering related field. |
||||||||||||||||||||||||
The Diploma in Mechanical Engineering programme should produce balanced and competent technical workers who are:
|
|||||||||||||||||||||||||
Upon completion of the programme, students should be able to:
|
|||||||||||||||||||||||||
JOB PROSPECT |
This programme provides the knowledge and skills in Mechanical Engineering field that can be applied to a broad range of careers in Mechanical Engineering. The knowledge and skills that the students acquire from the programme will enable them to participate in the job market as:
|
||||||||||||||||||||||||
ENTRY REQUIREMENTS |
For more information regarding the admission requirements for the Malaysian Polytechnic Program, please refer portal Ambilan Pelajar Mypolycc at |
DTP
ACCREDITATION CODE |
MQA/FA 13236 |
||||||||||||||||||||||||
INTRODUCTION |
In line with the 3rd Industrial Malaysia Plan (IMP3) aiming for the innovative and creative human capital development, via matching talent to expertise with market demand, Diploma in Mechanical Engineering (Manufacturing) for polytechnic is developed to give balance emphasis on theoretical and practical aspects. The Eleventh Malaysia Plan was drawn to produced 60% out of 1.5 million workers was in TVET sector. Until now a total of 69,475 (51%) of the 136,062 technical education and vocational training (TVET) graduates in Malaysia are working as professionals and skilled workers. Thus, to keep abreast with rapid demand in TVET sector, Department of Polytechnic and Community College Education (DPCCE) progressively collaborates with major industry players in the country in developing the curriculum. The programme will take six semesters to complete, five academic semesters at their respective polytechnics and one semester of industrial training at relevant industries during the final semester. This programme complies with the Board of Engineer (BEM) requirement. |
||||||||||||||||||||||||
SYNOPSIS |
The Diploma in Mechanical Engineering (Manufacturing) programme is designed to produce holistic graduates that have knowledge and competent skills in the field of mechanical engineering to fulfil the demand of workers in engineering sector. The programme structure focusses on the area of Solid Mechanics, Statics & Dynamics, Thermodynamics & Heat Transfer, Fluid Mechanics, Materials, Mechanical Design, Electrical, Manufacturing, Instrumentation & Control and Mechanical Maintenance |
||||||||||||||||||||||||
PROGRAMME AIMS |
The programme believes that every individual has potential and the programme aims to develop adaptable and responsible Senior Assistant Mechanical Engineers to support government’s aspiration to increase workforce in engineering related field. |
||||||||||||||||||||||||
The Diploma in Mechanical Engineering (Manufacturing) programme should produce Assistant Mechanical Engineers who are:
|
|||||||||||||||||||||||||
Upon completion of the programme, students should be able to:
|
|||||||||||||||||||||||||
JOB PROSPECT |
This programme provides the knowledge and skills in Manufacturing field that can be applied to a broad range of careers in Mechanical Engineering. The knowledge and skills that the students acquire from the programme will enable them to participate in the job market as:
|
||||||||||||||||||||||||
ENTRY REQUIREMENTS |
For more information regarding the admission requirements for the Malaysian Polytechnic Program, please refer portal Ambilan Pelajar Mypolycc at |
DEM
ACCREDITATION CODE |
MQA/FA 13237 |
||||||||||||||||||||||||
INTRODUCTION |
In line with the 3rd Industrial Malaysia Plan (IMP3) aiming for the innovative and creative human capital development, via matching talent to expertise with market demand, Diploma in Mechatronic Engineering for polytechnic is developed to give balance emphasis on theoretical and practical aspects. The Eleventh Malaysia Plan was drawn to produced 60% out of 1.5 million workers was in- TVET sector. Until now a total of 69,475 (51%) of the 136,062 technical education and vocational training (TVET) graduates in Malaysia are working as professionals and skilled workers. Thus, to keep abreast with rapid demand in TVET sector, Department of Polytechnic and Community College Education (DPCCE) progressively collaborates with major industry players in the country in developing the curriculum. The programme will take six semesters to complete, five academic semesters at their respective polytechnics and one semester of industrial training at relevant industries during the final semester. This programme complies with the Board of Engineer (BEM) requirement. | ||||||||||||||||||||||||
SYNOPSIS |
Diploma in Mechatronic Engineering programme is designed to produce holistic graduates that have knowledge and competent skills in the field of mechatronic engineering to fulfil the demand of workers in engineering sector. Five components related to the programme have been identified. Components make up the BOK for Diploma in Mechatronic Engineering are namely Technical, Personal Development, Mathematics, Science and Workplace Competencies. Technical Components is Electronic system, Mechanical System, Computers and Control Systems. |
||||||||||||||||||||||||
PROGRAMME AIMS |
The programme believes that every individual has potential and the programme aims to develop adaptable and responsible Senior Assistant Mechatronic Engineers to support government aspiration to increase workforce in engineering related field. |
||||||||||||||||||||||||
The Diploma in Mechatronic Engineering programme should produce balanced and competent technical workers who are:
|
|||||||||||||||||||||||||
Upon completion of the programme, students should be able to:
|
|||||||||||||||||||||||||
JOB PROSPECT |
This programme provides the knowledge and skills in Mechatronic Engineering field that can be applied to a broad range of careers in Mechatronic Engineering. The knowledge and skills that the students acquire from the programme will enable them to participate in the job market as:
|
||||||||||||||||||||||||
ENTRY REQUIREMENTS |
For more information regarding the admission requirements for the Malaysian Polytechnic Program, please refer portal Ambilan Pelajar Mypolycc at |